Polymer High Voltage Dropout Fuse Cutout Series 24kv Drop out

• Breaking Capacity: High Voltage Circuit Breakers
• Operation: Manual Type
• Speed: Normal Type Circuit Breaker
• Model NO.: RW-12-36
• Arc-extinguishing Medium: Air
• Installation: Fixed
• Structure: MCCB
• Poles Number: 4
• Type: Fuse
• Function: Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection), RCCB
• Certification: VDE, ISO9001-2000, CE, CB, CCC
• Rated Voltage: 24kv
• Creepage Distance: up to 1500mm
• Delivery Time: 3-15days
• Transport Package: Carton or Plywood Case
• Specification: Porcelain/Polymer
• Trademark: SAA
• Origin: China
• HS Code: 85351000
• Production Capacity: 50000PCS/Year

Product Description

Application: The expulsion fuse cutouts offer reliable mechanism for providing circuit protection in Aerial distribution systems for voltages ranging from 11kV to 36kV. It is designed to be installed outdoors for vertical cross arm or pole mounting.

Hinge
The hinge on the Cutout Fuse employs large pivot areas for the fuse holder's trunnion and is cast of a copper alloy chosen for its strength and corrosion resistance. The hinge contacts are highly conductive copper alloy stampings and are plated to assure low resistance current transfer from the trunnion casting. The parallel current paths are backed up by high strength cantilever springs and are riveted to the hinge castings. Fuse holder can be dropped into place and easily lifted up and out. No tricky maneuvering.
Fuse holder
The solid cap on the single vent fuse holder is a copper alloy, silver-plated to provide efficient current transfer. An integral ring is provided in the top tube casting for opening and closing the fuse holder with conventional disconnect tools from the ground, from a bucket truck or from the pole.
The toggle type trunnion casting is a selective silver-plated bronze for efficient current transfer to the lower hinge contacts. A cam shaped projection on each side of the trunnion casting provides high pressure parallel current paths to the lower contacts. These projections, or pivot pins, are cast full round for smooth rotational operation in the hinge. The link ejector assists in arc interruption during low fault current or excessive overload conditions. A groove in the center of the link ejector allows the fuse link's pigtail to go directly from the fuse tube to the attachment nut. A curved ejector minimizes bending stresses in the pigtail to prevent broken strands. A stainless steel torsion spring on the link ejector helps to rapidly eject the link from the bore of the fuse holder during interruption. The 200 ampere link ejector has a wider groove area and increased spring force to accommodate the larger links.
Fuse tube
The 1/2 inch inside diameter of the Cutout Fuse 100ampere fuse tube increases internal pressure giving superior and reliable expulsion action. During frequently encountered intermediate fault ranges this diameter also permits higher TRV (transient recovery voltage) values to be tolerated. This small bore design eliminates any concern related to high impedance phase-to-phase faults on ungrounded wye and delta systems.
The inside liner is constructed of a synthetic arc-quenching material. The tube is made of fiberglass which permits the smaller bore and provides a higher burst strength. It is protected from the weather and environment by a special ultra-violet resistant coating.

Rated System Voltage (kV)	Type	Rated Current (A)	Creepage Distance (mm)	External Insulation	Lightning Impulse Flashover Voltage (kV)		Power Frequency Flashover Voltage (kV)
					Terminal to Terminal	Terminal to Ground	Terminal to Terminal	Terminal to Ground
12	HRW12-12/100(200)	100/200	372	Ceramic / Composite	85	75	48	42
40.5	HRW12-40.5/100(200)	100/200	1256	Ceramic / Composite	118	95	215	185
Order Information: 1.Rated system Voltage; 2.Rated current; 3.External insulation; 4.Lightning impulse flashover voltage; 5.Power frequency flashover voltage Ps. Different design could be supplied as customer requirements

  
 

 

 

FAQ
1.Q:Can I get some samples?
    A:Yes, sample order is available for quality check and market test.

2.Q:Can your factory produce according to customer's requirements?
   A:Yes, we can produce different products according to customers' requirements.

3.Q:What's your packing standard?
    A:Usually we use standard cartons for packing or according to customers' requirements.

4.Q:When is the delivery time?
    A:We will arrange shipment within 3-20 days after your payment.

5.Q.Manufacturer With Competitive Price And High Quality.
   A:We are the manufacturer with direct sale price and high quality to help you open the markets which located in Hejian City, Hebei Province, China. Welcomed to visit our company.